Fixed Competitive Price Fiberglass Self-adhesive Tape to Slovak Republic Importers

The video shows the production of a construction unit using the layer building method with laminate fabric.

Processing:
Surface resin:
Mix well the components in the indicated mixing proportion. Lay on the mixture in thin layers with a brush. Wait until the surface resin gels; however, also make sure that it is still quite sticky in order to begin the next step. It is recommended that two layers of the surface resin are laid on, before the clutch layer is applied.
Note: between surface resin and the model underneath a clutch layer must be applied.

Laminating resin:
Mix the components in the indicated mixing proportion well. Impregnate the fabrics and develop for each situation. For structures of forms with high temperature stability (HT forms), symmetrical structure must be paid attention to, in order to minimize delay. The reinforcement elements from the same material must be as the laminate bowls (Warming Dimension Coefficient). The laminate bowls and reinforcement elements are mostly from glass or carbon fiber fabrics. Being warmer than the standard 20C room temperature as well as blank hardening systems improves the product final characteristics. In systems with a glass transformation temperature, Tg more largely than 70-80° C must be annealed according to the data on the data sheet.

Advantages of this procedure:
- Surface resin: With the application of a thin layer, different surface properties can be obtained (hard to flexible, chemical stability, polished etc.)
- Laminating: Depending upon the type of fabric light, rigid and high-strength forms or construction units with or without surface resin can be made
- One uses it particularly for larger and lighter forms
- Higher mechanical characteristics than a laminating paste